Welcome to Jiangsu Hengdali Steel Industry Co., Ltd.
6063 Aluminum plate
6063 aluminum alloy material. The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy.
6063 aluminum alloy profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.
SD alloy Aluminum plate
Al-cu-mg-zn alloy, which is made by adding Zn on the basis of duralumin.
This kind of alloy is currently the highest strength of aluminum alloy, higher than other aluminum alloy strength, so called super hard aluminum.
Disadvantage is also very poor corrosion resistance, can improve the artificial aging temperature or aluminum.
Super hard aluminum alloy with "aluminum chao" Chinese pinyin prefix "LC" plus serial number. Such as LC4, LC6, etc., are mostly used to manufacture important components with large stress, such as aircraft girders.
5052 Aluminum plate
5052 aluminum sheets belong to Al-Mg aluminum alloy, where magnesium is the main element inside.
This kind of alloy is the most extensively used anti-rust aluminum and it has high strength, extraordinary fatigue resistance, excellent plasticity and corrosion resistance; it is non-heat treatable: it has high plasticity at annealed condition, good plasticity when semi-cold hardening, while low plasticity during cold hardening.
It can be polished and has good corrosion resistance, excellent weldability, but poor machinability.
5052 aluminum sheets have been certified by ASTM B209 and our production are all conducted according to international standards.
5052-H32 Aluminum plate
5052 represents the brand of the product, and the word "5" indicates that the modified product belongs to the aluminum-magnesium alloy product.
According to the chemical composition, it can be seen that the magnesium alloy content of the product is between 2.2-2.8%, and the density is 2.68.
Generally enterprises take the median value of 2.5% magnesium alloy content in the processing process, so this series of aluminum plate can become AlMG2.5.
1050 Aluminum plate
1050 aluminum platealso known as pure aluminum plate, is one of the types of aluminum plate with the most heavy aluminum content, and its purity can reach more than 99.00%.
Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap.
It is the most commonly used aluminum plate in conventional industry at present.
7075-T6 Aluminum plate
7075-T6 aluminum alloy hardness is 150HB, belongs to the high hardness aluminum alloy.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
7075 aluminum heat treatment is because zinc is the main alloying element in 7075, adding magnesium to the alloy containing 3%-7.5% zinc can form a significant strengthening effect of MgZn2, so that the heat treatment effect of the alloy is far better than the al-zinc binary alloy; With the increase of zinc and magnesium content, the tensile strength of the alloy will be further improved, but its resistance to stress corrosion and spalling corrosion will decrease.
2024 Aluminum plate
2024 aluminum plate is a typical duralumin in al-cop-magnesium system with reasonable composition and good comprehensive properties.
The alloy is produced in many countries and is the most widely used duralumin.
The characteristics of the alloy are: high strength, a certain degree of heat resistance, can be used for working parts below 150℃.
The strength of 2024 alloy is higher than that of 7075 alloy at temperatures above 125℃.
5083 Aluminum plate
5083 belongs to Al-Mg-Si alloy, which is widely used, especially in the construction industry.
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
5083 aluminum is one of the most widely used antirust
7075 Aluminum plate
7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
The alloy also has good mechanical properties and anode reaction.
Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
CONTACT US
Tel : +8618915372544
E-mail : info@hengdalisteel.com
WhatApp : +8618915372544
GET A FREE QUOTE
Copyright : Jiangsu Hengdali Steel Industry Co., Ltd. Powerby : hengdali
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
