Welcome to Jiangsu Hengdali Steel Industry Co., Ltd.
Advantages of I-beams
Release time:
2023-03-14
I-shaped beams are hollow web members. For high-strength materials, hollow web members are better than solid web members in terms of weight, material, and labor saving. This cross-sectional design mainly uses the flange farthest from the centroid to
I-shaped beams are hollow web members. For high-strength materials, hollow web members are better than solid web members in terms of weight, material, and labor saving. This cross-sectional design mainly uses the flange farthest from the centroid to resist bending moments (because the farther the flange is, the greater the moment of inertia), and mainly uses the web to resist shear. As for the inconvenience in making it, it can be solved by factory or molding. Saving materials, labor, and time is efficiency.
Place a crossbeam horizontally on two supports, and when the crossbeam is subjected to downward pressure perpendicular to the axis, it bends. Compression deformation occurs at the upper part of the crossbeam, i.e. compressive stress occurs, and the closer it is to the upper edge, the more severe the compression is; Tensile deformation occurs at the lower part of the crossbeam, i.e. tensile stress occurs, and the closer it is to the lower edge, the more severe the tension becomes. And the middle layer is neither stretched nor compressed, so there is no stress. Due to the small contribution of the neutral layer to bending resistance, I-beams are often used in engineering applications to replace square beams and hollow pipes to replace solid columns.
Latest News
I-shaped beams are hollow web members. For high-strength materials, hollow web members are better than solid web members in terms of weight, material, and labor saving. This cross-sectional design mainly uses the flange farthest from the centroid to
2023-03-14
Characteristics of copper pipes
Lightweight, with good thermal conductivity and high low-temperature strength. Commonly used in the manufacturing of heat exchange equipment (such as condensers). It is also used for assembling low-temperature pipelines in oxygen production equipmen
2023-03-14
Characteristics of copper pipes
Lightweight, with good thermal conductivity and high low-temperature strength. Commonly used in the manufacturing of heat exchange equipment (such as condensers). It is also used for assembling low-temperature pipelines in oxygen production equipmen
2023-03-14
I-shaped beams are hollow web members. For high-strength materials, hollow web members are better than solid web members in terms of weight, material, and labor saving. This cross-sectional design mainly uses the flange farthest from the centroid to
2023-03-14
Four processes of steel bar processing
The processing of steel bars generally involves four processes: rust removal of steel bars; Straightening of steel bars; Steel bar cutting; Forming of steel bars. When the steel bar joint is connected with straight or conical threads, it is also nec
2023-03-14
What is the difference between carbon steel and sta
1. Different densities The density of carbon steel is slightly higher than that of ferritic and martensitic stainless steel, but it is lower for austenitic stainless steel, so the difference between carbon steel and stainless steel is different. 2.
2023-03-14
CONTACT US
Tel : +8618915372544
E-mail : info@hengdalisteel.com
WhatApp : +8618915372544
GET A FREE QUOTE
Copyright : Jiangsu Hengdali Steel Industry Co., Ltd. Powerby : hengdali
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
