Welcome to Jiangsu Hengdali Steel Industry Co., Ltd.
2024 Aluminum coil
2024 aluminum plate is a typical duralumin in al-cop-magnesium system with reasonable composition and good comprehensive properties.
The alloy is produced in many countries and is the most widely used duralumin.
The characteristics of the alloy are: high strength, a certain degree of heat resistance, can be used for working parts below 150℃.
6082 Aluminum coil
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
8xxx Aluminum Coil/Sheet
Thickness: 0.15-600mm
Port of Destination: Any port you like
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
3xxx Aluminum Coil/Sheet
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
1xxx Aluminum Coil/Sheet
Thickness: 0.15-150mm
Port of Destination: Any port you like
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
5xxx Aluminum Coil/Sheet
Thickness: 0.15-150mm
Port of Destination: Any port you like
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
5083 Aluminum coil
5083 belongs to Al-Mg-Si alloy, which is widely used, especially in the construction industry.
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
The main alloy element of 5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
Aluminium Sheet Coil
Al metal alloy: 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000 series etc
Alu temper: O - H112, T3 - T8, T351 - T851 etc
Thickness: 0.3mm - 6mm
Width: 900mm - 1600mm
6082-T6 Aluminum coil
6082-T6 aluminum, the main alloying elements in the alloy are magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, coating, excellent anodic oxidation effect, is a typical extrusion alloy.
Widely used in building profiles, irrigation pipes, pipes, bars and profiles for vehicles, platforms, furniture, elevators and fences.
- Total 1 Page/9 Records
CONTACT US
Tel : +8618915372544
E-mail : info@hengdalisteel.com
WhatApp : +8618915372544
GET A FREE QUOTE
Copyright : Jiangsu Hengdali Steel Industry Co., Ltd. Powerby : hengdali
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
