A53 Carbon steel round bar

A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc.Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

A214 Carbon steel round bar

A214 is a steel grade produced according to American ASTM standards, which belongs to American standard.Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

A192 Carbon steel round bar

192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel.Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

ST37 Carbon steel round bar

Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

A106Gr. B Carbon steel round bar

A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 ″ - 28 ″, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials.Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

DIN Carbon steel round bar

Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 t carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel

Carbon steel round bar

Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structuralsteel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used fordrawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steelare generally used to make mechanical structural parts.

Rectangular Pipe(RHS)

Application: Widely used in furniture,interior decoration, structureSize:OD: 20mm*10mm ~ 400mm*300mmPipe Standard: ASTM A500/AS1163/BS1387/JIS G3466/EN10210/EN10219/ASTM A501Surface:Black bared ,can be galvanized,oiled,painted,powdered.Packing:Waterproof plastic bag,bundle with strip

Square Pipe(SHS)

Square tube size: 10*10mm-500*500mm. WT: 0.5-20mm L: 0.3-18mtrStandard & Grade: EN 10210:S235JRH,S355J2H,S355NH,S355J0HEN 10219:S235JRH,S355J2H,S355NH,S355J0HASTM A500:Gr.A,Gr.B,Gr.CSurface:Black bared ,can be galvanized,oiled,painted,powdered.Packing: Waterproof plastic bag,bundle with strip

Welded API 5L Line Pipe

API 5L pipe is carbon steel pipe used for oil and gas transmissions, it includes the pipes manufactured in seamless and welded (ERW, SAW). Materials covers API 5L Grade B, X42, X46, X52, X56, X60, X65, X70, X80 PSL1 & PSL2 onshore, offshore and sour services.